Printer knife
Your current position: Home >> News >> Company News
News

Contact person: Mr. Liu

Mobile: 135-3828-3678

Tel: 0755-2138-5612

Fax: 0755-2138-5612

E-mail:13538283678@139.com

Website: www.kerongtechnology.com

Address: Building C21, Tantou Industrial Park, Songgang Town, Bao’an District, Shenzhen City, Guangdong Province, China

Proper use of slitting circular blades

Date:2016-07-27 Author:admin Click:


Proper use of slitting circular blades


Do not think that working in the factory, you will use all the tools, in fact, many of the production tools and knives often used in your daily work, maybe you still rookie it! how about it? You do not believe, here's a look!

According to a survey report, the number of skilled workers in the production and processing industries who can correctly use the production tools is less than 50% of the enterprises. Maybe you will question: Is this possible? We use it every day, but we have long been acquainted with it. In fact, often used tools you often overlooked the use of steps and maintenance methods, these are also very large damage to the machine, take the round blade for example, it is no stranger to many workers, however, the slitter How exactly do the blades be used and how many people follow the wrong operating procedures?


In production, the slitter blade is a tool for cutting the product and making the model. Therefore, it needs a sharp texture in order to facilitate the cutting of the product. In use, if a tool change occurs, it is necessary to cut off the power supply in advance and stop the main motor of the tool. This is done instead of performing the blade replacement without paying attention to safety during the entire process.Secondly, every time a new slitter blade is installed, it is necessary to pay attention to the adjustment of the position of the blade, and manually adjust the height of the knife bed, which is conducive to the proper installation and better use of the blade.Thirdly, for the depth of the slitter blades, we also need to modulate the cutting bed to the lowest point and observe whether the depth of its cutting into the 0.5-1 mm or so, only to reach this position, it is more appropriate to be able to Make sure to cut the round blade during use.



Url:http://en.kerongtechnology.com/news/354.html

Browse:

Share 一键分享
Welcome to leave message
Please input the message here, we will contact you as soon as possible.
Name
Name
Phone
Phone
Email
Email
Adress
Adress