Explain how to maintain the slitter blade
Regardless of whether you are using a cutting machine blade made at the entrance, you will not pay attention to the correct application method and maintenance of the blade. This will reduce the service life of the blade and increase the cost of the product. You can teach and teach people today. The real application method of cutting blade allows you to lower the cost
Begin by checking whether the various operating keys can be sensitive before turning on the machine. Add smooth oil to the smooth part. Apply a large number of high-temperature resistant calcium grease to the thin knife drive gear. Then adjust the knife line according to the manufacturing requirements. Here you must pay attention to the cutting distance. The blade must be lifted to leave the sipe before it can be moved. Do not interlock with the sipe. Otherwise, the blade may deform or destroy the blade.
Slitting machine blade position adjustment
After adjusting the blade position of the slitter, the slitter blade is slowly put into the sipe, and the depth is 3~5mm. The slitting blade must be in the middle of the slit, and the offset is not enough, and the two cannot beat, otherwise the blade is turned on. 3. Friction with the flutes will burn the thin blades.
The quality of the slitter blade is every 200~50mm with a quality scale. It is better to stick to the sloppy language and pay attention to the paper edge and other foreign objects. Do not insert it into the blade transmission gear to avoid damaging the machinery. Real-time elimination of confetti and oil on equipment.